[How is it used?
I had replaced it with a MOTOMASTER front disk rotor (item no. 112379) and used it for a while, but the inner 1/3 of the rotor was not usable with OEM Brake Pads, and I thought it was a waste of space. One day, I thought that since BYBRECaliper is made by BREMBO, I could use the Pad for BREMBO. I looked for a pad that would be compatible using the pad measurement as a clue, and I found it! (1PIN) Pad for 40mmPitch caliper can be used.
Was the one you received as per Image?
The OEM Brake Pads were Large in size, about 30% longer vertically, while maintaining the same width.
Was the installation difficult?
Basically, it is mountable to the bolt. However, in order to align the contact position between the pad and the rotor correctly, the upper side of the hole for the pad pin has been slightly shaved and enlarged, and the pad has been placed closer to the inside of the rotor so that it does not protrude from the outer circumference of the rotor. The pad spring is a Yamaha TZr (3XV) I used a spring from Caliper for the spring. The reason why we used this is because it can hold the pad firmly in the direction of the inside of the rotor.
How was your experience with it?
Before purchasing the pad, I had estimated that the pad area would increase by about 30% compared to the measurement, so I chose the Hyper pad with basic performance because I thought it would be dangerous to use a pad with high braking force in the dark, and I was right. It is a pad that is very easy to control, and does not have the clunky brake that is common with overly powerful brakes.
[Included Parts:were they on?
It does not come with a PadShim like the OEMPad, but I did not hear any unpleasant noise when braking. If it makes noise in the future, we will add a Shim for BREMBOPad, which is sold by Other Brand Product.
[Was there anything that disappointed you?
The cost performance is good since the total cost of the Rotor and Pad is less than 25,000 yen, and the MOTOMASTER Rotor is about 400g lighter than the OEM Rotor, so the weight can be reduced under the Spring at the same time.
Other items that would be helpful
Point and hang of installation:Since this is a diversion that requires some modification, installation is at your own risk.
View Detail
