Very Good
It looks nice, but maintainability and heat resistanceFirst of all, the workmanship of the product, the arrangement of the Carbon eyes etc.. There is not much
Compared to OEM, it has an overwhelming presence.
Regarding the installation, although it is all self-installing, it was pretty daunting.
First of all, in addition to ordinary tools, Front-up Stand : Try twisting and detaching difficult unless you remove the Top Bridge.
Masking tape : Side cowletc. Masking to prevent scratches on parts that are likely to come into contact.
Hang the tank from the top : On the OEM's pillar will disturb the movement of the Top Bridge.
Removed parts etc. To prepare for installation, Top Bridge, Screen (It is necessary to divert the edge of TopCowl) ,
TankUp (It is necessary to move the Top Bridge to get it under the tank) ,
Brake and Clutch lever (Hose can not move to Tank side by bracing) ,
Either Handlebar (If the top bridge is not oblique at 45 °, the bar interferes)
If possible, if you leave Front fork, it will be easy to install without scratching the surroundings - - -
The attached state Fit feeling is Fit without firstly processing, but to OEMCover there is a Grommet,
There is no protrusion to push down from the top. Therefore, Quantity : Pair (for Left and Right) Can not fix bulging of.
Clearance with Tank Parts is wider than OEM, and insulation treatment is not done on Reverse side, so it is quite a while driving
I'm afraid to have a fever.
From 08 onwards, even under OEM, insulation measures at the bottom of the tank (Heat Insulating Material directly above Mission) Because of the hotness of the Engine is transmitted to the feet from the gap of Tank as soon as possible, further heat damage is likely to accelerate.
There is Fuse in TopCowlLeft Side, but it is possible to exchange somehow by floating the Cover around Meter.
It will be a rather troublesome and large-scale task, if you can not think this is fun, we will ask for a shop request.
Aside from those who are suffering from hot air from the bottom of the Tank since 08,
Automatic for Vehicle gap Tape is pasted between Tank and Frame to remove heat insulation treatment on the bottom surface of the tank bottom part Pump part and OEM Mission upper heat insulation seat to let the hot air escape from the Swingarm part.
By installing the WaterproofSmall Type electric fans at the bottom of the tank if possible, it is hardly hot.
.
View Detail