[Inhoud van de kit]
Aluminium gashendelhouder
gaspedaalbuis
Vuilcontrolegrip
4 maten van standaard haspels (35/40/45/50mm)
progressieve nokkenrol
Japanse handleiding
*Voor de off-road Rev2-gaskleppakket is een minimumstuurlengte van 200 mm nodig om te zorgen voor voldoende ruimte tussen het Rev2-gasklephuis en de hydraulische remhendel.
*De Rev2-kit wordt geleverd met modelspecifieke kabels, maar de Rev2-gasklep zelf is niet modelspecifiek. Daarom kan de Rev2-kit onder bepaalde omstandigheden niet direct worden vastgeschroefd vanwege de beperkte fabrieksruimte.
*Afhankelijk van de installatiemethode kan het nodig zijn om, als het stuur te kort is voor de Rev2-gasklep en de handgrepen, andere bedieningscomponenten te verplaatsen of het stuur te vervangen door een langere aftermarket.
*Het is de verantwoordelijkheid van de klant om de beste installatiemethode voor zijn motorfiets te bepalen en ervoor te zorgen dat de Rev2-kit op de juiste wijze wordt geïnstalleerd met de juiste vrije ruimte voor veilig gebruik.
*De installatie van het product moet worden uitgevoerd door een gekwalificeerde monteur, die zorgvuldig moet controleren of het product goed functioneert.
*WAARSCHUWING: Onjuiste installatie kan leiden tot ernstig letsel of de dood.
[Kit Contents]
Aluminum Throttle Holder
Throttle Tube
Dirt Control Grip
4 sizes of standard reels (35 / 40 / 45 / 50mm)
progressive cam reel
Japanese instruction manual
*The off-road Rev2 throttle kit requires a minimum handlebar length of 200mm to allow sufficient clearance between the Rev2 throttle housing and the hydraulic brake lever.
*The Rev2 kit comes with a cable specifically designed for each model, but the Rev2 throttle itself is not model specific.Therefore, under certain circumstances, the Rev2 kit may not be a direct bolt-on due to the limited stock space.
*Depending on the installation method, if the handlebar is too short for the Rev2 throttle tube and grips, other control components may need to be moved or the handlebar replaced with a longer aftermarket one.
*It is your responsibility to determine the best method for your motorcycle and to ensure that the Rev2 kit is properly installed with the correct clearances for safe operation.
*The installation of the product must be carried out by a qualified mechanic, who must carefully check for proper functioning.
*Warning: Improper installation can result in serious injury or death.