Zwaaiarm: geen stompe soort
Materiaal: Aluminium
Breedte Breedte: Aantal: Paar (voor links en rechts) 4,5 cm verbreding (260 mm breed super superSpec.)
China
* Deze zwenkarm is een product van KEPSPEED dat hoogwaardige aluminium onderdelen vervaardigt.
* Deze zwenkarm is ontworpen om zonder aanpassing te worden gebruikt, als u deze met de complete set kunt gebruiken.
* Aangezien we de combinatie van de afstemming met producten van andere bedrijven niet hebben geverifieerd, vragen we u dit te bevestigen.
* Remstang voor trommelrem is apart verkrijgbaar. Koop deze in overeenstemming met de breedte en lengte van de zwenkarm.
* Ervaren personen met betrekking tot het onderhoud van motorfietsen moeten de montagewerkzaamheden uitvoeren.
* Het aantal frames in de aandrijfketting varieert afhankelijk van de lichaamsconditie van de klant en de kettingwielen rondom.
* Zelfs als de achterwielophanging volledig is aangesloten, moet u controleren of er een abnormaal contactpunt is voordat u begint te rijden.
* Als de speling tussen uw frame en deze zwenkarm aan elke kant 0,5 mm of meer is, voer dan een procedure uit om de opening met een wasmachine of iets dergelijks te verkleinen.
* Wanneer de zwenkas wordt vastgedraaid in een staat met grote speling, wordt een hoge belasting op de zwenkarm uitgeoefend en in het ergste geval kan deze worden beschadigd.
* Let op het optreden van de zogenaamde initiële losheid na de start van de run en voer een frequente inspectie uit om geen onverwachte problemen te veroorzaken.
* Kleine krassen en krassen kunnen optreden als gevolg van transportproblemen. Het valt niet onder de garantie, behalve defecten die de waarde of functie van het product aanzienlijk verminderen.
Swingarm: No Stabilizer
Material: made of aluminum
Wide width: 4.5cm wider on both sides (260mm width super wide specification)
made in China
[Notes on purchase]
*All GM-MOTO products are custom parts.Since these products are set up in response to the requests of heavy users, there may be parts of the product that change or decrease from the original driving performance.Please use as dress-up parts for show model machines.Therefore, it is not suitable for driving on public roads or tracks.In some cases, it may not be possible to mount the unit on a motorcycle, or adjustments and modifications may be required in various areas.
*This swingarm is a product of KEPSPEED, a manufacturer of high quality aluminum parts.
*This swingarm is designed to be used without adjustment when the complete kit is used.
※GM-MOTO has not verified the consistency of the combination with other companies' products.
*Brake rods for drum brakes are sold separately.Please purchase according to the width and length of the swingarm.
*Please make sure that the person with experience in motorcycle maintenance performs the assembly work.
*The number of tentioners of the drive chain will vary depending on the condition of your vehicle and the front and rear sprockets.
*Even if the rear suspension is at full bottom, make sure to check for any abnormal contact points before riding.
*If the gap between the frame and the swingarm is more than 0.5mm on each side, please use washers to reduce the gap.
*If the pivot shaft is tightened with a large gap, the swingarm will be subjected to a high load and may be damaged in the worst case.
※After the start of riding, pay attention to the occurrence of so-called initial loosening and perform frequent inspections to prevent unexpected problems.
*Because it is made overseas, the molding, welding, painting, etc. may be insufficient.There may be some minor scratches and scuffs due to transportation problems.
*There may be changes in product specifications due to the manufacturer's reasons.