The panel / cylindrical air filter is commonly referred to as "replacement air filter". It is installed in the vehicle's original airbox to replace the OEM air filter. It is made of highly performing materials that allow an increased air flow combined with a more efficient filtration, guaranteeing containment of all impurities from as small as 7 microns (compared to OEM's 10 microns).
Grafico prestazioni
Air flow chart for a sample BMC air filter against an OEM paper filter
Temperatuur 25C° - Vochtigheid 25% - Druk 1020mbar
Test ran with oem airbox, and the related air flow constrictions.
This chart has a pure illustrative purpose and does not refer to the present filter.
BMC air filters are produced using a "Full Moulding" system that enables the characteristic red filter to be realized from a single mould with no welded joints thus avoiding easy breakage. The rubber used in BMC air filtering systems has a long life, is very durable and has optimum adhesion characteristics to all shapes of airboxes.
BMC filters are made of a multi-layered cotton gauze soaked with low viscosity oil covered with an epoxy coated alloy mesh to ensure protection from petrol fumes and oxidization due to air humidity.
All BMC air filters are pre-oiled, and they can be washed and regenerated by using the appropriate BMC regeneration kit.
Vertaling.
Paneel-/cilindervormige luchtfilters worden gewoonlijk "vervangingsluchtfilters" genoemd.. Het wordt bevestigd aan de originele luchtbox van het voertuig om de OEM-luchtfilter te vervangen.. Het is gemaakt van een hoogwaardig materiaal dat een verhoogde luchtstroom mogelijk maakt in combinatie met een efficiëntere filtratie en garandeert de insluiting van alle onzuiverheden vanaf 7 micron (in vergelijking met de 10 micron van de OEM's)..
Grafico prestazioni
Luchtstroomgrafiek van monster BMC-luchtfilter tegen OEM-papierfilter
Temperatuur 25°C - Vochtigheid 25% - Druk 1020mbar
Test uitgevoerd op oem airbox en bijbehorende luchtstroom vernauwing.
Deze grafiek is louter ter illustratie en verwijst niet naar de huidige filter.
BMC-luchtfilters worden vervaardigd met behulp van een "full moulding" systeem.. Dit systeem maakt de realisatie van karakteristieke rode filters uit één enkele mal mogelijk zonder lasverbindingen en vermijdt een eenvoudige breuk.. Het rubber dat wordt gebruikt in BMC-luchtfiltratiesystemen is duurzaam, extreem duurzaam en heeft optimale hechtingseigenschappen voor airboxen in alle soorten en maten..
BMC-filters zijn gemaakt van meerlagig katoenen gaas dat is bedekt met een epoxy gecoat gaas voor olie met een lage vochtigheidsgraad, waardoor bescherming tegen benzinedampen en oxidatie door luchtvochtigheid wordt gegarandeerd..
Alle BMC-luchtfilters zijn voorgesmeerd en kunnen worden gereinigd en geregenereerd met behulp van de juiste BMC-regeneratiekit..
The panel / cylindrical air filter is commonly referred to as ”replacement air filter”. It is installed in the vehicle’s original airbox to replace the OEM air filter. It is made of highly performing materials that allow an increased air flow combined with a more efficient filtration, guaranteeing containment of all impurities from as small as 7 microns (compared to OEM’s 10 microns).
Grafico prestazioni
Air flow chart for a sample BMC air filter against an OEM paper filter
Temperature 25C° - Humidity 25% - Pressure 1020mbar
Test ran with oem airbox, and the related air flow constrictions.
This chart has a pure illustrative purpose and does not refer to the present filter.
BMC air filters are produced using a ”Full Moulding” system that enables the characteristic red filter to be realized from a single mould with no welded joints thus avoiding easy breakage. The rubber used in BMC air filtering systems has a long life, is very durable and has optimum adhesion characteristics to all shapes of airboxes.
BMC filters are made of a multi-layered cotton gauze soaked with low viscosity oil covered with an epoxy coated alloy mesh to ensure protection from petrol fumes and oxidization due to air humidity.
All BMC air filters are pre-oiled, and they can be washed and regenerated by using the appropriate BMC regeneration kit.
[Translation]
Panel / cylindrical air filters are commonly referred to as "replacement air filters".It is attached to the vehicle's original air box to replace the OEM air filter.It is made of a high performance material that allows increased air flow combined with more efficient filtration and guarantees containment of all impurities from 7 microns (compared to the OEM's 10 microns).
Grafico prestazioni
Air flow chart of sample BMC air filter against OEM paper filter
Temperature 25°C - Humidity 25% - Pressure 1020mbar
The test ran on a contraction of the airflow associated with oem airboxes.
This chart is purely for illustrative purposes and does not refer to the current filter.
BMC air filters are manufactured using a "full moulding" system.This system allows the realization of a characteristic red filter from a single mold without welded joints and avoids easy breakage. The rubber used in the BMC air filtration system is long-lasting and extremely durable, with adhesive properties that are ideal for airboxes of all shapes and sizes.
BMC filters are made of multi-layered cotton gauze covered with an epoxy-coated alloy mesh for low-humidity oil, ensuring protection from gasoline fumes and oxidation by air humidity.
All BMC air filters are pre-lubricated and can be cleaned and regenerated using the appropriate BMC regeneration kit.