Hoeveelheid]1
[Grootte]
Schroefdiameter 12mm
Bereik 19mm
Steeksleutel grootte 16mm
Vorm] Type eindscheiding
NGK compatibel]D6EA,D7EA,D8EA,DR6EA,DR7EA,DR8EA,DP6EA9,DP7EA9,DPR6EA9,DPR7EA9,DPR8EA9,DPR7EIX9,DPR8EIX9,DCPR7E(voor Harley),DCPR8EK,DCPR8E8 EIX etc.
*Verkrijgbaar bij voertuigen met een getuned ontstekingssysteem.
*Niet beschikbaar voor voertuigen met een normaal ontstekingssysteem.
*Verkrijgbaar uit voertuigen met volledige transistorontsteking.
*Niet verkrijgbaar bij voertuigen met CDI-ontsteking.
*Beschikbaar voor 4-takt voertuigen.
*2-takt voertuigen tot volledige transistorontsteking is aanvaardbaar.
*Omdat de Brisk LGS-stekker een extreem brede stekkeropening heeft en het ontstekingsvermogen dat alleen hieraan kan ontladen noodzakelijk is, kan het zijn dat hij in het normale ontstekingssysteem niet voldoende functioneert.
*Let op: het past niet op het CDI-ontstekingssysteem. Brisk ZC/ZS type past op het CDI-ontstekingssysteem.
*Weerstandstype (met weerstand).
*De steeksleutel is 16 mm groot en wordt gebruikt voor de C-stekker.
*Aangezien de terminal een apart type is, is hij compatibel met elke vorm van de stekker. De klemmen zijn licht geschroefd op het moment van verzending, dus controleer de dichtheid van de klemmen op het moment van installatie.
*Het uitsteeksel in de verbrandingskamer is echter langer, zodat het noodzakelijk is om te controleren of er sprake is van een verstoring van de zuigerkop.
*Het aanhaalmoment is 1,3kg-cm. Pas op voor breuk door te veel koppel.
BOR14LGS (NGK "D plug" size)
[Quantity] 1
[Size]
・Screw diameter 12mm
・Reach 19mm
・Plug wrench size 16mm
[Shape] Terminal separation type
[NGK compatible] DP6EA9, DP7EA9, DP8EA9, DPR6EA9, DPR7EA9, DPR8EA9, DPR7EIX9, DPR8EIX9, DCPR7E (for Harley), DCPR8EK, DCPR8EIX etc.
*Heat value correspondence is from No. 6 to No. 8.(Confirmation of the amount of protrusion in the combustion chamber is required.)
*This product is a racing part.Even if there are indications of compatible models or plug compatibility, be sure to check for interference with the piston and use at your own risk.
*We are not responsible for any damage to the engine caused by defects in the product.
*Ignition tuned bikes - available.
*Ignition system stock bikes - Not available
*Full transistor ignition bikes - available.
*CDI ignition bikes - Not available.
*4-stroke bikes - available.
*2-stroke bikes - full transistor ignition system is available.
*Brisk LGS plug has become an extremely wide plug gap setting, and because the ignition ability that can only discharge to this is necessary, it may not function sufficiently in the stock ignition system.
*Please note that it does not fit CDI ignition system.For CDI ignition vehicles, Brisk ZC / ZS type fits.
*Resistor type (with resistor).
*Plug wrench size is 16mm which is used for C plug etc.
*The terminal is separable, so it is compatible with any plug cap shape.When the unit is shipped, it is only lightly screwed in, so check the tightness of the terminal when installing
*Please refer to the NGK plug list for other compatibility information.The ones with 12mm thread diameter and 19mm thread length are compatible, but they protrude into the combustion chamber longer, so it is necessary to check if there is any interference with the piston head.
*The tightening torque is 1.3kg-cm.Be careful of breakage due to overtorque.
*There may be changes in product specifications due to the manufacturer's reasons.
* Please note in advance that cancellation and/or return of this product cannot be accepted once the order has been placed.