[specs]
Verplaatsing : 49cc
Centrifugaalkoppeling Terugkeer 4-traps (Shiftpatroon N-1-2-3-4)
Geen cellen.
[Accessoires (voor Aap)
Schoppedaal
Verplaatsingspedaal
Verzamelleiding
・CDI
Toezichthouders
Knipperlichtrelais
Hoofdapparatuur
*Het bijgevoegde spruitstuk is voor [ca30.ca31] Tanaka Shokai's carburateur. Het kan niet gebruikt worden voor de echte carburateur.
*Het is een retourtype, dus het gaat niet in de neutrale stand van de 4e versnelling.
*Als u het op een 12V-voertuig installeert, kunt u het fabrieksharnas gebruiken, maar dan moet u de koppeling voor de aansluiting van de motor op een gibosh-klem vervangen.
*De [ca885] 12v motorombouwgordel is zeer geschikt voor 6v voertuigen. (Het standaard 6v-harnas kan worden gebruikt, dus het is niet nodig om het harnas te verwisselen)
*Bij installatie op een 6v voertuig is het noodzakelijk om de batterij, kleppen en andere elektrische componenten te vervangen door die voor 12v.
*Het bijgevoegde spruitstuk is voor Aap. Sommige voertuigen (Shari, Cub, enz.) moeten mogelijk worden aangepast en passen mogelijk niet.
*Ongeacht de keuze van het harnas, de inhoud van de set zijn de onderdelen voor Aap.
[Specification]
・Displacement: 49cc
・Centrifugal clutch Return 4-speed (shift pattern N-1-2-3-4)
・Without cell-strater
[Components (for MONKEY)]
・Kick Pedal
・Shift pedal
・Manifold
・CDI
・Regulators
・Blinker relay
・Main harness
*The attached manifold is for the carburetor sold by Tanaka Trading [ca30, ca31].It cannot be used with stock carburetor.
*It is a return type, so it will not go into neutral from 4th gear.
*For 12v vehicles, the stock harness can be used, but the coupler for the engine connection must be replaced with a crimp terminal.
*When installing on a 6V Vehicle, the [ca885] 12V engine replacement harness is very convenient.(The 6v stock harness can be used, so there is no need to change the harness)
*When installing on a 6V bike, it is necessary to convert the electrical system such as battery and valve to 12V.
*The supplied manifold is for Monkey.Some vehicles (CHALY, CUB, etc.) may require modification and may not fit.
*Regardless of the harness selection, the set contents are parts for Monkey.
*If the breather pipe of the engine body is installed between frames, the pressure inside the crankcase will increase and oil will leak out, which is very dangerous.Check the condition of the breather pipe after engine installation before starting the engine.
*Tanaka Trading does not exchange products after shipment.Please check the engine model carefully before purchasing.
*The sprocket attached to the engine is for checking the engine start.Sprockets are not replaced.
*There may be changes in product specifications due to the manufacturer's reasons.
* Please note in advance that cancellation and/or return of this product cannot be accepted once the order has been placed.