Dit product is een klein veranderingsproduct van AE-68125..
We hebben de vorm opnieuw geëvalueerd en geoptimaliseerd voor een slimmere montage om tegemoet te komen aan de verandering in de koepelspeling als gevolg van de wijziging in de specificaties (*1) rond de radiatorbevestiging voor 2019 modellen..
(*1)Radiatorsteun is veranderd van roestvrij staal (zilver) naar hars (zwart)..
Beveiligt het magnesium carter.
Het carter van de Panigale V4 is gemaakt van magnesium om het gewicht te verminderen, en als het beschadigd raakt tijdens een val, zoals bij een staande start, is er dure vervanging nodig..
De AELLA-beschermkap is gemaakt van bewerkt aluminium (materiaal A2017) en hard geanodiseerd om de oppervlaktesterkte te verhogen, en zijn unieke kleur komt overeen met de magnesiumdekking.. De kleur lijkt op champagne goud, maar het is niet gekleurd geanodiseerd aluminium, dus het zal niet vervagen door hitte of ultraviolette stralen.. (*Er zal een klein kleurverschil zijn, afhankelijk van het lot van het anodiseren.. (De kleur kan aan beide zijden niet precies hetzelfde zijn.. )
De vorm is het belangrijkste onderdeel van het ontwerp, zodat de dikte (uitsteeksel) zo min mogelijk zichtbaar is..
De wanddikte is maximaal 6 mm en 2,5 mm op het punt waar geen belasting wordt toegepast.. De binnenzijde van de hoes is bedekt met hittebestendig fluorrubber om de impact op de koffer te verzachten in geval van een val..
Andere voordelen
Kan worden gebruikt met AELLA-moterschuivers.
De installatie kan worden gedaan door eenvoudigweg de onderste kap te verwijderen, en het product zelf heeft slechts enkele minuten nodig om te installeren..
This product is a minor change product of AE-68125.
AELLA has re-evaluated and optimized the shape for smarter fitting to accommodate the change in cowl clearance due to the change in specifications (*1) around the radiator mount for 2019 models.
(*1) Regarding the change in specifications: The radiator mount is changed from stainless steel (silver) to resin (black).
Securely guards the magnesium crankcase.
The crankcase of the Panigale V4 is made of magnesium to reduce the weight, and if it is damaged during a fall, such as a fall from a standing start, it will require expensive replacement.
The AELLA guard is made of machined aluminum (A2017 material) and hard anodized to increase surface strength, and its unique color matches the magnesium cover.The color is like champagne gold, but it is uncolored anodized aluminum, so it does not fade due to heat or ultraviolet rays.(*Depending on the lot of anodized aluminum, there may be a slight color difference.The color may not be exactly the same on both sides.)
The shape is the most important part of the design, so that the thickness (protrusion) does not appear as much as possible.
The maximum thickness of the wall is 6mm, and 2.5mm at the point where there is no burden.The inside of the cover is covered with heat-resistant fluorine resin rubber to soften the impact on the case in the event of a fall.
○Other benefits
・This product can be used with AELLA engine sliders.
・Installation can be done by simply removing the lower cowl, and it takes only a few minutes for the product to be installed.