[specs]
Nominale spanning : DC12V
Energieverbruik : 20W
Kleurtemperatuur : 6000k
gebruikte LED : CREE XLamp XP-L LED's
Model van de fabrikant van het lichtuitstralende deel : LB7-KN
13-18 Speciale kit voor BMW F700GS LED koplamp Lo beam side
Bolt-on installatie van de kit voor specifieke automodellen
H7 Enkelvoudig type
Met keuringscertificaat
Uitgerust met lamp-uit-waarschuwingsknipperlicht
Voorzichtig.
*Dit product is alleen voor 12v DC min gemeenschappelijk. Zorg ervoor dat u 12v DC-voeding gebruikt voor de bedrading.
*Dit product is niet compatibel met AC-koplampen, die vaak worden gebruikt in kleine verplaatsingsvoertuigen, dus installeer dit product niet.
*Minus common betekent dat de negatieve kant van de bedrading van de koplamp gemeenschappelijk is voor zowel de Hi-bundelzijde als de Lo-bundelzijde. Dit product is niet compatibel met voertuigen met positieve gemeenschappelijke koplampen.
*Dit product is uitsluitend bedoeld voor gebruik op motorfietsen en kan niet worden gebruikt op vierwielige voertuigen.
*Niet bedekken met papier of doek en niet aansteken in de buurt van ontvlambare materialen. Het kan een brand of abnormale opwarming veroorzaken. Steek de lamp niet aan in de buurt van brandbare of ontvlambare materialen zoals ontvlambare spray of verdunner.
*Monteer niet aan de koplamp als deze brandt. Het kan storingen of brandwonden veroorzaken.
*Dit product is waterdicht voor het dagelijks leven, maar niet volledig waterdicht. Maak de koppeling die uit de controllerunit komt waterdicht met vinyltape, zelfklevende tape of breeuwmiddel. Maak het product niet meer dan nodig nat met water.
*Bij het wassen van een auto met een hogedrukreiniger mag de hogedrukreiniger dit product niet direct raken.
*Laat de LED-lamp of de regeleenheid niet vallen en geef ze geen sterke schok. Het kan niet alleen leiden tot schade, verslechtering van de prestaties en verkorting van de levensduur, maar ook tot letsel.
*Breng bij de montage van de LED-lamp het meegeleverde siliconenvet aan. Zie deze handleiding voor meer informatie.
*Raak de LED-chip niet aan als deze uit of aan is.
*Dek de waterdichte koelventilator niet af. Zorg ervoor dat er voldoende ruimte achter de ventilator is om de lucht te laten stromen.
*De waterdichte koelventilator heeft een specifieke richting voor de installatie. Zorg ervoor dat u hem installeert met de zilverkleurige ronde afdichting naar buiten gericht.
*Gebruik een schroefvergrendeling om te voorkomen dat de schroeven loskomen. Draai de schroeven regelmatig vast.
*Installatie vereist gespecialiseerde kennis en vaardigheden. Laat het doen bij een aangewezen onderhoudswerkplaats met een vakbekwame monteur.
*Zorg ervoor dat u de optische as voor gebruik aanpast. Dit product kan het zicht op tegenliggers belemmeren en verkeersongevallen veroorzaken. Voor details verwijzen wij naar de veiligheidsnormen voor wegvoertuigen.
*De installatie van dit product kan de garantie van de voertuigfabrikant ongeldig maken.
*Wij zijn niet verantwoordelijk voor storingen, ongevallen of andere schade die door het gebruik van dit product worden veroorzaakt. Daarnaast zijn wij niet verantwoordelijk voor de arbeidskosten van verwijdering en installatie en andere kosten die worden gemaakt bij het repareren van het product. Geef het van tevoren aan.
*Als u een afwijking voelt tijdens de installatie of het gebruik, neem dan contact op met de dealer waar u het product heeft gekocht of met de serviceafdeling van Protec.
[Over de beschrijving van de conformiteit van het voertuig]
*Dit product wordt verkocht als een product dat compatibel is met de inspectie van voertuigen, maar dit gaat over de maximale lichtsterkte en kleurtemperatuur. Zorg ervoor dat de optische as door de inspectiemachine wordt aangepast aan de LED (nieuwe lichtbron) na de installatie van het product. Wij zijn niet verantwoordelijk voor vlekken, mist, krassen, het afschilferen van de reflectorplaten in het licht, het mislukken van de voertuiginspectie door het gebruik van niet-genetische koplampen, of slecht onderhoud door een slechte afstelling van de optische as of door veroudering.
[Specification]
・Rated voltage: DC12V
・Power consumption: 20W
・Color temperature: 6000k
・Use LED: CREE XLamp XP-L LEDs
・Manufacturer's model of the light emitting part: LB7-KN
・13-18 Dedicated kit for BMW F700GS LED headlight bulb Lo beam side
・Bolt-on installation of the kit for specific models
・H7 Single Type
・With inspection certificate
・Equipped with bulb-out warning indicator canceller
[Notes]
*This product is only for 12V DC Minus Common.Be sure to use DC12V as the power source for wiring.
*Please do not connect to the AC headlight, which is common in small displacement vehicles.
*Minus common refers to the type in which the negative side of the headlight wiring is common to both the Hi beam side and Lo beam side.Not compatible with vehicles with positive common headlights.
*This product is for motorcycles only, so cannot be used on four-wheeled vehicles.
*Do not cover with paper or cloth and do not light near flammable materials.Failure to do so may result in fire or abnormal heating.Also, do not light near flammable items such as flammable spray, thinner, etc. or items that may ignite.
*Do not install to the headlight with the light on.Failure to do so may result in malfunction or burns.
*This product is waterproof for daily life, but it is not completely waterproof.Wrap the coupler coming out of the controller unit with vinyl tape or self-bonding tape, or use caulking agent to waterproof it.Avoid wetting the product with more water than necessary.
*When washing a vehicle with a high pressure washer, please do not let the high pressure wash directly hit this product.
*Please do not drop the LED bulb or controller unit, or give it a strong shock.It not only causes breakage, deterioration of performance and shortening of service life, but also causes injury.
*Be sure to apply the included silicone grease when assembling the LED bulb.Please refer to this manual for details.
*Do not touch the LED chip when it is off or on.
*Do not cover up the waterproof cooling fan.Make sure that there is enough space behind the fan for the sucked air to flow.
*The waterproof cooling fan has a specific orientation for installation.Be sure to install with the silver round seal facing outward.
*Use a thread locker to prevent loosening of the threaded part.Periodic retightening is also recommended.
*Installation requires expertise and skill.Please have it done at a designated maintenance facility with skilled mechanics.
*Please adjust the optical axis before use.It may obstruct the view of oncoming vehicles and cause traffic accidents.
*PROTEC is not responsible for any damage or accident caused by the use of this product.Protec will not be responsible for any labor charges or other costs incurred during repair.
*If you feel any abnormality during installation or use, please contact your dealer or PROTEC service department.
After installing the product, be sure to adjust the optical axis using an inspection machine that is compatible with LED (new light source).PROTEC is not responsible for any dirt or clouding of the light lens, scratches, peeling of the reflector plating inside the light, or poor maintenance due to poor optical axis adjustment or age-related deterioration.