125/250 / 390DUKE geproduceerd in India heet SmallDUKESeries en is populair onder KTM opstellingen vanwege de goede prijs, en een achterste drager die drie voertuigen past bij hetzelfde uiterlijk tijdens de installatie motoren met verschillende cilinderinhoud volumes. aangemaakt.
Het is een WorldWalk-achtig ontwerp dat kracht geeft door dunne stalen ronde staven te combineren.
1. De hoogte van de bovenplaat is hetzelfde als het grote lichaam
De hoogte van het bovenste bord is aangepast aan de OEM zodat lange items kunnen worden geladen. De reden waarom de bovenkant iets omhoog gaat, is om te voorkomen dat het deksel opent en sluit wanneer de achterste doos is geïnstalleerd.
2.Breek geen OEM scherp ontwerp
De voet die de bovenplaat ondersteunt, is gemaakt om de kap te volgen en de bovenplaat heeft een scherp ontwerp met de achterkant versmald zodat het beeld van het voertuig niet wordt vernietigd.
3. bovenste plaatgrootte is 250 mm x 240 mm
In overeenstemming met DUKE's TailDesign, dat scherp naar achteren versmalt, heeft de bovenplaat een groot gevoel in brede en smalle delen.
4. Laadweerstand is 5 kg
Het versterken van de ondersteunende kolom die het bovenste bord ondersteunt, is het draagvermogen 5 kg. Het is mogelijk om een achterbox van het type Groot te bevestigen.
5. Installatiebout is roestvrij staal
De bout voor de bevestiging van de achterdrager neemt roestvrij staal aan dat moeilijk te roesten is.
125 / 250 / 390DUKE produced in India is called the Small DUKE series and is popular in the KTM lineup because of its low price.World Walk has created a rear carrier that fits three vehicles with different displacement engines, but with a common appearance.
It is designed to be strong by combining thin steel round bars.
1. The height of the top panel is roughly the same as the pillion seat
The height of the top panel is adjusted to the stock height so that long items can be loaded.The reason why the rear box is slightly raised is to prevent the lid from retracting when the rear box is installed.
2. Does not disrupt the sharp design of the stock
The legs that support the top panel are designed along the cowl, and the top panel is narrowed at the back side to keep the image of the vehicle.
3. Top board size is 250mm x 240mm
The size of the top panel differs greatly between the wide part and the narrow part in accordance with the tail design of DUKE which tapers sharply toward the back.
4. Load capacity is 5kg
The load-bearing capacity is 5kg with reinforcement in the pillar supporting the top board.A large rear box can also be installed.
5. Mounting bolts are stainless steel
The bolts used to mount the rear rack are made of stainless steel to prevent rusting.