[Nominale spanning]
・DC12V
[Grootte]
Buitendiameter : W57XH40XD12,3mm (exclusief uitstekende delen)
[set bevat].
Brandstofmeter lichaam X1
Speciale verbindingsbundel X1
Gebruikershandleiding
Garantie
[specs]
Weergave in twee standen van de resterende hoeveelheid en de gebruikte hoeveelheid
DG-329 wordt gebruikt als brandstofmeter.
Voor 16 en 17 liter tankwagens wordt de instelling gewijzigd.
Alle benodigde onderdelen voor de installatie zijn inbegrepen.
*Er is een geval dat er een specificatiewijziging van de grondstof is door het gemak van de fabrikant. Begrijp alsjeblieft.
*Dit product is alleen voor 12V-voertuigen met brandstofinjectie.
*Installeer het apparaat niet op voertuigen met dubbele injectoren. Als het apparaat niet op een voertuig met één injector per cilinder wordt geïnstalleerd, kan de nauwkeurigheid sterk afnemen.
*Druk niet langer dan 1 seconde op de SET-schakelaar van het hoofdtoestel alleen. De geregistreerde gegevens over het brandstofverbruik worden gereset en gaan verloren.
*Volg bij de installatie van het product de gebruiksaanwijzing voor de juiste installatie. Een onjuiste installatie kan leiden tot brand of een storing.
*Protec is niet verantwoordelijk voor enige schade veroorzaakt door het gebruik van dit product, inclusief storingen en ongelukken. Begrijp het alstublieft van tevoren.
*Protec is niet verantwoordelijk voor eventuele arbeidskosten voor verwijdering en installatie of andere kosten die tijdens de reparatie worden gemaakt. Begrijp het alstublieft van tevoren.
*De productspecificaties en het uiterlijk van het product zijn voor verbetering vatbaar.
[Rated voltage]
・DC12V
[Size]
・Outer diameter: W57 x H40 x D12.3mm (excluding protruding parts)
[Set components]
・Fuel gauge unit x 1
・Special connection harness x 1
・Instruction Manual
[Specification]
・Two-mode display of remaining amount and amount used
・DG-329 is used fro the fuel gauge unit
・For 16 and 17 liter tank vehicles, the setting is changed
・All necessary parts for installation are included
*There may be changes in product specifications due to the manufacturer's reasons.
*This product is for 12V fuel injected vehicles only.
*Do not install on twin injector vehicles.The accuracy may be greatly reduced if the unit is installed in a vehicle other than those with one injector per cylinder.
*Do not press the SET switch of the main body alone for more than 1 second.The registered fuel consumption data will be reset and lost.
*Install the product correctly according to the instruction manual.Improper installation may result in fire or equipment damage.
*PROTEC is not responsible for any damage or accident caused by the use of this product.
*Protec is not responsible for any labor charges for removal or other expenses incurred during repair.
*The specifications and appearance of the product are subject to change for improvement.