Chromoly staal (3-laags plateren)
[Spec. ]Moerset
[Installatie]
*De as is een kritische component.
Zorg ervoor dat gekwalificeerd personeel de installatiewerkzaamheden in de pro shop uitvoert.
Doe dit met het juiste gereedschap dat geschikt is voor de kopvorm van de as.
Het is gekrast op de beplatingsfolie die op het asoppervlak is aangebracht, wat roest veroorzaakt als u het met een verkeerd gereedschap vastdraait.
Spuit a.u.b. vet op het asoppervlak voordat u de installatie uitvoert.
Het veroorzaakt meestal geen roest van de schacht zelf, omdat het het "drie lagen coating proces" van KOOD original op het schachtoppervlak toepast. Het wordt veroorzaakt door het metaalpotentiaalverschil, om roestvorming door wiellagers enz. te voorkomen.
Neem de door de fabrikant opgegeven waarden voor het aandraaimoment in acht.
Bevestig de moer voor voertuigen die worden gemonteerd met behulp van de OEM-moer.
Zorg ervoor dat u een nieuwe moer gebruikt wanneer deze in de moer wordt gezien, zoals krassen die worden veroorzaakt door een vallend en zelfblokkerend functiedeel. Dit om schade aan het schroefdraadgedeelte van de as te voorkomen.
[Over productkwaliteit]
Wat betreft het productbeheer, het produceren en beheren in een perfect systeem, maar neem contact met ons op voor het werk als je problemen hebt door een kans.
*In ieder geval kunnen we niet reageren op claims en geretourneerde producten na het werk (zoals het passeren van de as door het wiel) helemaal niet.
Over roest
"KOOD made shaft" is onderworpen aan een "drielaagse coating".
Het heeft sterke coating verwerking in vergelijking met de gewone plating coating. Het kan roesten, afhankelijk van de gebruikssituatie, maar het maakt niet uit voor de kwaliteit.
Het is "roestend".... roest van de buitenzijde rijdt op het beplatingsoppervlak
Overgangsroest. Uitwendige roestvorming op het beplante oppervlak
Schade aan de coating.... Onjuist gebruik van gereedschap, opstapjes of vallen tijdens het rijden, enz.
*Roest valt niet onder de garantie.
Bedankt voor uw begrip.
* Het bevat andere delen op de foto.
* Houd er rekening mee dat de productspecificatie kan veranderen vanwege redenen van de fabrikant.
[Material] Chromoly steel (3-layer plating finish)
With plated nut
*There may be changes in product specifications due to the manufacturer's reasons.
*Even if the vehicle is compatible, it will not fit if the front forks are not stock or if the vehicle has been customized.
[About the installation]
*Axle shafts are critical parts.
Installation must be carried out by qualified personnel at a professional shop.
・Please use the appropriate tool for the head shape of the shaft.
If the shaft is tightened with an inappropriate tool, the plating film on the shaft surface will be scratched and rust will be caused.
・Before installation, apply grease or other oil to the shaft surface.
The surface of the shaft is treated with KOOD's original "3-layer plating film", so rust will not occur on the shaft itself under normal use.The purpose is to prevent rust transfer from wheel bearings, etc., which is caused by the potential difference of metals.
・Please observe the tightening torque specified by the manufacturer.
・If the vehicle is installed using the stock nut, please check the nut.
If the nut is damaged by tipping over, etc., or if the self-locking part is worn out, be sure to use a new nut.This is to prevent damage to the shaft threads.
[About Product Quality]
・KOOD has taken all possible measures to manage the production. However, if there is any problem, please contact KOOD before the work.
*In no event will KOOD accept any claims or returns after the installation (such as threading the shaft into the wheel).
・About rust
KOOD shafts are treated with a "3-layer plating film".
It is processed with a stronger film than normal plating film.Rust may occur depending on the usage conditions, but there is no problem with the quality.
・Transferred rust: Rust from the outside gets on the plated surface
・Damage to the plating film... Improper use of tools, flying rocks during riding, falls, etc.
[Caution]
In case of KOOD shafts with plated nuts, damaging the threads during installation often happens.
Due to the nature of plating, this is often seen when the plated parts (e.g. KOOD shaft and KOOD nut) mesh with each other or when the threaded part is greaseless.
Please use an anti-corrosive grease such as sledge compound on the screw part when you install it.