■ Details
Het vergroten van het oppervlak van de koelribben helpt de toename van de cilindertemperatuur te verminderen..
Plated cilinder is een cilinder met een uitstekende duurzaamheid, luchtdichtheid en warmteafvoer, die is gemaakt van aluminium geïntegreerde huls en keramische plating behandeling.. Bovendien is de mouw voldoende dik..
Het cilinderhuis is uitgerust met een olie-uitlaat die het mogelijk maakt om olie uit de oliekoeler te halen en er kan een temperatuursensor worden geïnstalleerd om de cilindertemperatuur te meten..
De temperatuursensor is exclusief voor de SP Mukawa stick temperatuursensor..
Toepasselijke cilinderkop en cilinderinhoud
SP Mukawa Super Head (Fase 3) 120cc/130cc
Super kop +R 120cc/130cc
Boring diameter: 58mm
Wanneer de auto met de 124cc kit is geïnstalleerd.
Als u momenteel gebruik maakt van SP Mukawa Super Head (Stage 3) Bore & Stroke Up Kit 124cc, en u installeert deze kit, zal de verplaatsing 130cc zijn..
Wanneer een voertuig dat momenteel is uitgerust met een 115 cc-kit is geïnstalleerd
Als u SP Mukawa Super Head (Stage 3) Bore Up Kit 115cc met voorraadslinger gebruikt en u installeert deze kit, zal de cilinderinhoud 120cc zijn..
■Details
By increasing the surface area of the cooling fins, it is possible to reduce the increase in cylinder temperature.
Plated cylinder is a cylinder with excellent durability, airtightness and heat dissipation, which is made of aluminum integrated sleeve and ceramic plating.In addition, the thickness of the sleeve is secured sufficiently.
The cylinder body is equipped with an oil outlet that allows oil to be taken out to the oil cooler, and a temperature sensor can be installed to measure the cylinder temperature.
The temperature sensor is for SP Takegawa stick temperature sensor only.
Applicable cylinder head and displacement
SP Takegawa Super Head (Stage 3) 120cc / 130cc
Super head +R 120cc / 130cc
Bore Diameter: 58mm
■When a motorcycle currently equipped with a 124cc kit is installed
If you have SP Takegawa Super Head (Stage 3) Bore & Stroke Up Kit 124cc, and you install this kit, the displacement will be 130cc.
■When a motorcycle currently equipped with a 115cc kit is installed
If you use SP Takegawa Super Head (Stage 3) Big Bore Kit 115cc with stock crank, the displacement will be increased to 120cc with this kit.