basismaterialen : aluminium (Al)
[Inhoud van de kit]
Brede schommelarm (zonder stabilisator +20cm)
3-delige 10-inch 5,5J wielen
Brede naaf
Remsysteem
Aandrijftandwiel offset systeem
Brede ophanghanger
[Over de installatie]
De beugel voor de bevestiging van de hoofdremcilinder van de achterrem is niet inbegrepen in de kit. Gelieve het apart voor te bereiden. Voor de aandrijftandwielset is het noodzakelijk om het tandwielgedeelte van het generatordeksel af te snijden. De kit is compatibel met Japanse motoren en Rongshin-motoren, maar sommige Chinese motoren, zoals Lihuan 150cc, zijn misschien niet in staat om 4 punten te ondersteunen.
Voor de voor- en achtertandwielen gebruikt u de 420 maat voor Aap. Instructies voor de montage zijn inbegrepen in de kit. Raadpleeg de gebruiksaanwijzing en monteer deze zorgvuldig. De technieken van gezond verstand voor onderhoudswerkzaamheden worden echter niet beschreven in de handleiding. De montage moet worden uitgevoerd door een persoon met ervaring in het onderhoud van motorfietsen. Het aantal frames van de aandrijfketting varieert afhankelijk van de toestand van de motorfiets van de klant en de voor- en achtertandwielen, dus GM-MOTO geeft hierover geen informatie.
Zelfs als de achterwielophanging helemaal vol is, moet u voor het rijden controleren of er geen abnormale contactpunten zijn. Als er een opening van 0,5 mm of meer is tussen het frame en de zwenkarm, gebruik dan ringen om de opening te verkleinen. Als de scharnieras bij een te grote spleet wordt aangespannen, wordt de zwenkarm zwaar belast en kan deze in het ergste geval beschadigd raken. Let na de start van het rijden op het optreden van zogenaamde "initiële losheid" en voer regelmatig controles uit om onverwachte problemen te voorkomen.
*Omdat dit product in het buitenland wordt gemaakt, kunnen het vormen, het lassen, het schilderen, enz. onvolledig zijn. Er kunnen wat kleine krasjes en slijtplekken op zitten als gevolg van transportproblemen.
*Door specificatiewijziging zijn de kettingversteller en de standaardhaak veranderd van goudkleurig naar titaankleurig.
*Er is een geval dat er een specificatiewijziging van de grondstof is door het gemak van de fabrikant. Begrijp alsjeblieft.
Material: Aluminum
[Kit Contents]
・Wide swingarm (without stabilizer +20cm)
・3-piece 10-inch 5.5J wheels
・Wide hub
・Brake system
・Drive sprocket offset system
・Wide suspension hanger
[Notes on purchase]
*All GM-MOTO products are custom parts.Since these products are set up in response to the requests of heavy users, there may be parts of the product that change or decrease from the original driving performance.Please use as dress-up parts for show model machines.Therefore, it is not suitable for driving on public roads or tracks.In some cases, it may not be possible to mount the unit on a motorcycle, or adjustments and modifications may be required in various areas.
[About the installation]
The rear brake master cylinder fixing bracket is not included in the kit.Please prepare separately.The drive sprocket offset kit requires the sprocket section of the generator cover to be cut off.However, some Chinese engines such as Lifan 150cc may not be able to support 4 points.
Please use the 420 size sprockets for Monkey.Assembly instructions will be included.Please refer to the instruction manual and assemble carefully.However, common sense techniques for maintenance work are not described in the manual.Experienced motorcycle mechanics are required to perform the assembly work.The number of frames of the drive chain varies depending on the condition of the customer's vehicle and the front and rear sprockets, so GM-MOTO does not provide information on this.
Even when the rear suspension is at full bottom, be sure to check for any abnormal contact points before driving.If there is a gap of 0.5mm or more between the frame and the swingarm, please use washers to reduce the gap.If the pivot shaft is tightened with a large gap, the swingarm will be subjected to a high load and may be damaged in the worst case.After the start of driving, pay attention to the occurrence of so-called "initial loosening" and perform frequent inspections to prevent unexpected problems.
*Because it is made overseas, the molding, welding, painting, etc. may be insufficient.There may be some minor scratches and scuffs due to transportation problems.
※The chain adjuster and the stand hook have been changed from gold to titanium color.
*There may be changes in product specifications due to the manufacturer's reasons.