[specs]
Zwart geanodiseerd aluminium
Driedelig wiel
[10X4.0J type].
Totale breedte van de velg (actuele meting) : 119 mm (±0,5)
Compensatie A : 56.5 mm (±0,5)
Compensatie B : 62.5 mm (±0,5)
[10X5.5J type].
Totale breedte van de velg (actuele meting) : 158 mm (±0,5)
Compensatie A : 76 mm (±0,5)
Compensatie B : 82 mm (±0,5)
fabrikant : KEPSPEED
land van herkomst : China
*Verkocht in eenheden van één.
*Bij gebruik van KEPSPEED CNC spaken zijn de offsetwaarden aan beide zijden gelijk.
*De velg kan ook worden gebruikt met de 4-hub Daks en Charlies. 3-hub Daks kunnen ook worden gebruikt, maar de steek van de gaten is anders, zodat de gaten apart moeten worden geboord. Aangezien de 5,5 J brede achterbrug voor Daks niet bestaat als G.M.Moto product, zult u de volledige achterkant moeten overzetten op een complete Monkey of zelf een achterbrug moeten maken. Kijk op de G.M.Moto website voor voorbeelden van aanpassingen.
*Er kunnen gebieden op de spaken zijn waar de anodisering niet is aangebracht, maar dit is te wijten aan het fabricageproces en is geen defect van het product. Begrijpt u dit alstublieft van tevoren.
*Dit product is ontworpen voor gebruik met KEPSPEED-producten zonder aanpassing. Voor andere veringsets kan het nodig zijn de wielmiddens aan te passen.
*Omdat dit product in het buitenland wordt gemaakt, kunnen het vormen, het lassen, het schilderen, enz. onvolledig zijn. Er kunnen wat kleine krasjes en slijtplekken op zitten als gevolg van transportproblemen.
*Alle GM Moto producten zijn op maat gemaakte onderdelen. De producten zijn ontworpen voor zware gebruikers en kunnen de oorspronkelijke rijeigenschappen wijzigen of verminderen. Ze zijn bedoeld als opsmukonderdelen voor showmodelmachines. Daarom is hij niet geschikt voor rijden op de weg of op het circuit. In sommige gevallen is het niet mogelijk de onderdelen op de motorfiets te monteren, of zijn er aanpassingen en wijzigingen nodig, zodat wij u aanraden de onderdelen te laten monteren door een specialist in motorfietsonderhoud.
*Er is een geval dat er een kleine specificatiewijziging is in het gedetailleerde deel voor elk product. Er is een punt dat lichtjes afwijkt van het inleidende beeld, maar ik zal voorrang geven aan het eigenlijke, dus begrijp me goed, alstublieft.
*Let na het begin van de rit op het optreden van zogenaamde "initiële lossing" en voer regelmatig controles uit om onverwachte problemen te voorkomen.
*Andere types kunnen in de afbeelding worden opgenomen.
*Er is een geval dat er een specificatiewijziging van de grondstof is door het gemak van de fabrikant. Begrijp alsjeblieft.
[Specification]
・Black anodized aluminum
・3 Piece Wheel
[10 x 4.0J type]
Total width of rim (actual measurement): 119mm (±0.5)
Offset A: 56.5mm (±0.5)
Offset B: 62.5mm (±0.5)
[10 x 5.5J type]
Total width of rim (actual measurement): 158mm (±0.5)
Offset A: 76mm (±0.5)
Offset B: 82mm (±0.5)
Manufacturer: KEPSPEED
Country of origin :China
[Notes on purchase]
*All GM-MOTO products are custom parts.Since these products are set up in response to the requests of heavy users, there may be parts of the product that change or decrease from the original driving performance.Please use as dress-up parts for show model machines.Therefore, it is not suitable for driving on public roads or tracks.In some cases, it may not be possible to mount the unit on a motorcycle, or adjustments and modifications may be required in various areas.
*Sales will be in units of 1 bottle.
*When using KEPSPEED CNC spokes, the left and right offset values are equal.
*Rims can also be used on Dax Chaly 4-hubs.It can also be used for 3-hub, but the hole pitch is off, so it is necessary to drill holes separately.In addition, since the wide swingarm for 5.5J for Dax does not exist as a GM-MOTO product, it is necessary to transfer the rear side complete set with a complete set for the Monkey or make it by yourself.Please check G.M. Moto's website for custom examples.
*There may be some areas on the spokes that are not anodized, but this is due to the manufacturing process and is not a defect of the product.
*This product is designed to be used without adjustment when used in combination with KEPSPEED products.If you use it with other suspension kits, you may need to adjust the wheel center.
*Because it is made overseas, the molding, welding, painting, etc. may be insufficient.There may be some minor scratches and scuffs due to transportation problems.
*All GM-MOTO products are custom parts.Since these products are set up in response to the requests of heavy users, there may be parts of the product that change or decrease from the original driving performance.Please use as dress-up parts for show model machines.Therefore, it is not suitable for driving on public roads or tracks.In some cases, it may not be possible to mount the unit on a motorcycle, or adjustments and modifications may be required in various areas.
※There may be some minor specification changes for each product.There may be some points that differ slightly from the introduction image.
※After the start of riding, pay attention to the occurrence of so-called initial loosening and perform frequent inspections to prevent unexpected problems.
*The image may contain other types.
*There may be changes in product specifications due to the manufacturer's reasons.