14.91 EUR
(2,430 JPY)
12.38~ EUR
(2,018 JPY)
(17% OFF)
4 (7 alle Reviews)
Excellent
It is easy to use and considerate64mm in length used in the XV1600's OEM Oil Filter 3FV-13440-30 I did
Aluminum Die-casting for robustness and light weight
The surface is also pearskin, so it's hard to slide and easy to handle
The 9.5mm mounting hole makes it possible to use the torque wrench as it is It is
There is a hexagonal part, but it seems not to be used here because it is equivalent to 24mm
There's a little bit of rattling in the filter
It does bite a bit when you tighten it up, so you'll need to tap it lightly to remove it
I think it will be just as good if you stick the Aluminum Tape on it as others have written It is
Reviews For KTC Bekertype oliefiltersleutel From Other Webike User
Excellent
nice to have in toolboxGreat tool to do the final tightening of oil filters to spec. Also great for removing difficult filters and not having to resort to the screwdriver method.This is a great tool for the older . The cheap auto parts store sockets push off the filter when you insert the extension, so if you need to lean on it, it is an issue.I like this oil filter socket wrench because I can use a socket drive or a socket with it. I have another oil filter wrench that only lets me use a socket wrench drive. It protrudes down into the wrench too far and contacts the filter. This causes the wrench to want to lift up off the filter. Very frustrating. The KTC filter, however, will also allow me to use a socket , eliminating the problem of the wrench lifting off the filter. I highly recommend this filter wrench.View Detail
Average
Good accuracyThese tools may not be accurate, or they may not come off in anticipation, or they may not be able to come off.
Licking can cause scratches.
This product is so precise, it fits perfectly.
Loosening and tightening can be done very Smoothly.
It is a reliable Brand and will be used for a long time.View Detail
Very Good
One is handy.There are many different types of oil filter tools available, but the Cup is the most effective way to remove the cartridge type oil filter without crushing it.View Detail
Very Good
It's Die-casting!Die-casting instead of the usual ElementWrench made by PRESS (Castings, RoboMaterial in Poppy, which means super synthetic gold)
A masterpiece of self-indulgence
It's a quality that Sunday mechanic doesn't need
I don't have to force myself to choose this one, and anything I could use would be fine, but I wanted to buy something before the tax increase And when the WebikePoint deadline is nearing, I was agitated to buy it. w
I tried to match it with the Element I have, but the fit is appropriate 。 With this KTCCupWrench, you can hang the demon Torque when it's not loose and it won't slip
I guess the crying point is the price, not the difference between the two, which is not the difference that I LARGE
If you change the oil element every 6,000km, you'll have to drive 18,000km to get your money's worth Right
Unlike cars, there are only a few places where you can change motorcycle oil, so you can do it yourself For those of you who can do it, it's easy maintenance and it doesn't feel like you bought time
If you plan to ride out your current car, or if you don't feel comfortable doing whatever it takes to do it yourself, tools Recommendation to Mania
I dared to set the question of whether you can recommend to a friend a no
A friend of mine would lend you the WView Detail
Excellent
I knew it was KTC!I am using it to replace the Filter in my W800
There are a few cheaper ones out there, but I chose the KTC because I wanted to make sure the work was done right
There is also a Wrench of the winding type, but it will be Cup type when thinking about workability It's easy to work with the W800, even with the narrow space around the filter
When you turn it, you can also use Glassesetc. but the insertion hole for 9.5sq Ratchet is available
The textured surface of the wrench can be slipped or dropped with oiled hands It's hard to do
This is not a particularly distinctive feature, but it doesn't have any problems with use It's obvious, but it's not always like this
The size is 64mm The size of the Wrench side is 64.2mm and the Filter side is about 63.8mm There may be a little bit of Rose variability depending on things
You can leave it as it is, but when you tighten or loosen it, you can feel it slipping slightly I am using it by sticking Aluminum Tape on the inside of Wrench
I've already used it a few times and it's easy to use It won't break, so if you don't lose it, there's no repeats (Lol)
View Detail
Most Viewed Reviews Of KTC Oil Filter Wrenches
Excellent
nice to have in toolboxGreat tool to do the final tightening of oil filters to spec. Also great for removing difficult filters and not having to resort to the screwdriver method.This is a great tool for the older . The cheap auto parts store sockets push off the filter when you insert the extension, so if you need to lean on it, it is an issue.I like this oil filter socket wrench because I can use a socket drive or a socket with it. I have another oil filter wrench that only lets me use a socket wrench drive. It protrudes down into the wrench too far and contacts the filter. This causes the wrench to want to lift up off the filter. Very frustrating. The KTC filter, however, will also allow me to use a socket , eliminating the problem of the wrench lifting off the filter. I highly recommend this filter wrench.View Detail
Average
Good accuracyThese tools may not be accurate, or they may not come off in anticipation, or they may not be able to come off.
Licking can cause scratches.
This product is so precise, it fits perfectly.
Loosening and tightening can be done very Smoothly.
It is a reliable Brand and will be used for a long time.View Detail
Very Good
One is handy.There are many different types of oil filter tools available, but the Cup is the most effective way to remove the cartridge type oil filter without crushing it.View Detail
Very Good
It's Die-casting!Die-casting instead of the usual ElementWrench made by PRESS (Castings, RoboMaterial in Poppy, which means super synthetic gold)
A masterpiece of self-indulgence
It's a quality that Sunday mechanic doesn't need
I don't have to force myself to choose this one, and anything I could use would be fine, but I wanted to buy something before the tax increase And when the WebikePoint deadline is nearing, I was agitated to buy it. w
I tried to match it with the Element I have, but the fit is appropriate 。 With this KTCCupWrench, you can hang the demon Torque when it's not loose and it won't slip
I guess the crying point is the price, not the difference between the two, which is not the difference that I LARGE
If you change the oil element every 6,000km, you'll have to drive 18,000km to get your money's worth Right
Unlike cars, there are only a few places where you can change motorcycle oil, so you can do it yourself For those of you who can do it, it's easy maintenance and it doesn't feel like you bought time
If you plan to ride out your current car, or if you don't feel comfortable doing whatever it takes to do it yourself, tools Recommendation to Mania
I dared to set the question of whether you can recommend to a friend a no
A friend of mine would lend you the WView Detail
Excellent
I knew it was KTC!I am using it to replace the Filter in my W800
There are a few cheaper ones out there, but I chose the KTC because I wanted to make sure the work was done right
There is also a Wrench of the winding type, but it will be Cup type when thinking about workability It's easy to work with the W800, even with the narrow space around the filter
When you turn it, you can also use Glassesetc. but the insertion hole for 9.5sq Ratchet is available
The textured surface of the wrench can be slipped or dropped with oiled hands It's hard to do
This is not a particularly distinctive feature, but it doesn't have any problems with use It's obvious, but it's not always like this
The size is 64mm The size of the Wrench side is 64.2mm and the Filter side is about 63.8mm There may be a little bit of Rose variability depending on things
You can leave it as it is, but when you tighten or loosen it, you can feel it slipping slightly I am using it by sticking Aluminum Tape on the inside of Wrench
I've already used it a few times and it's easy to use It won't break, so if you don't lose it, there's no repeats (Lol)
View Detail
Other Reviews From Japan User(translated)
Excellent
Radipon handled in Mild?attachment
The CBR650R is mounted at the same position angle as the NORMAL.
However, when the handlebar was cut to the Left lock, it interfered with the interior cover next to the Meter, so the interior cover was cut away.
I also purchased a 45° angled banjo adapter for the mesh hose to accommodate the tension of the mesh hose.
・NORMAL (Reserve integrated horizontal master) Impressions of
No complaints on public roads. Familiar feel and very easy to handle.
However, when the brake is set to "hard brake," the rate of increase in braking force relative to the input seems to decrease, and the brake becomes more forceful.
Radipon (Reserve separate body portrait master) Impressions of
It was totally different from what I expected, my expectation was that it would feel like a Rear brake…
It is really a mild and easy-to-handle radipon.
On public roads, it feels like NORMAL! I wonder if it's because NORMAL is the same NISSIN?
But I felt the radipon effect from Breaking a little stronger, and
It can be hung up to a hard brake without effort.
I felt trust that this could stop.View Detail
Very Good
packtalk bold Attached MountI purchased this for use with multiple Helmets. 。
Mount included with the BOLD.
Microphone and speaker are not included and must be purchased separately.View Detail
Excellent
Grip replacementGrip that had been used for a long time was worn out and had to be replaced.
They are soft and dampen vibration.View Detail
Very Good
Works well in everyday life[How is it used?
Used to lick Screw loose.
Was the one you received as per Image?
As per Image.
How was your experience with it?
When used on a strongly tightened Screw, it can be safely and securely removed.
The licked Screw was removed.
It is also useful for DIY Screw removal.
[Points to note]
When used on a licked Screw, it is best to beat it in with a Hammer before use.View Detail
THE LARGEST
SHOP IN JAPAN
EXCLUSIVE COUPONS,
SALE, DEALS
FAST, RELIABLE
SHIPPING