Stick temperatuursensor

Works as expected but you have to be very careful with the set screw

Magichippo01

Installed on: HONDA Monkey 125

Average

Jul 3, 2024

Product works as expected but you have to be very careful with it. Not much tension from the set screw is required to hold the sensor in place! Very easy to damage the body if you over tighten.

Helpful?

NO NAME

Excellent

Dec 7, 2023

Good item for monkey 125

It's a really good product. Both the finish and the design are excellent. Thank you for your prompt delivery. I recommend this product to others, too.

Helpful?

Jiin Kim

Installed on: HONDA Monkey 125

Excellent

Oct 17, 2023

온도 센서 추가 구입했음.

정비사가 센서 분리를 서투르게 해서 손상을 입었다. 재사용은 가능하지만 혹시 몰라서 여분의 센서를 구입했다. 센서만 따로 팔아서 매우 좋다. 교체는 누구나 할 수 있는 수준으로 문제가 없다. 앞으로 엔진오잏 교체시 내가 직접 분리하거 정지소에 가는 것이 좋겠다고 생각한다.

Helpful?

Jiin

마지막 문장 오타 발견! 앞으로 엔진오일 교체시 내가 직접 분리하고 정비소에 가는 것이 좋겠다고 생각한다.

1 year ago

On Cheong

Installed on: KAWASAKI Z125 Pro

Very Good

Dec 18, 2022

Sensor probe

Bought a complete set temperature meter previously but after sometime the sensor probe went faulty. Perhaps I over tighten it but anyway, it's working fine now. I bought 2 pcs due to the expensive shipping fees.

Helpful?

Replacement Temperature Sensor for the SP Takegawa Compact LCD Thermometer

NO NAME

Installed on: HONDA MSX125 (GROM)

Excellent

Oct 23, 2022

About quality and texture: I am happy with the quality of the temperature sensor stick from SP Takegawa. Made using a short electrical wire attached to the temperature bulb and using a small electrical connector that allows easy positioning when routing the wire.About the feeling of use: The temperature sensor 3mm diameter bulb fits perfectly into the SP Takegawa oil drain bolt and passes the signal for display on the compact LCD therometer but care must be taken during install so to not crush the bulb and during removal so to not pull the wire from the bulb.Products to buy together: A SP Takegawa oil drain bolt with the mounting hole for the temperature sensor stick would also be desirable to purchase along side the temperature sensor stick for a secure mounting.Difficulty of installation: The process to install takes about 5 minutes, use the included allen key from the oil drain bolt purchase to back off the grub and position the bulb into the bolt then lightly tighten the grub screw to avoid crushing the bulb. Connect the electrical plug and zip tie the wire in a suitable position to avoid being damage if just left hanging from the bottom of the engine. Not difficult to do.Cost performance and comparison with other products: Good costing as you are getting a accurate reading temperature sensor made from quality parts that is plug and play with the SP Takegawa compact LCD thermometer. There are cheaper sensors available from Koso but am unsure if they would work with the SP Takegawa compact LCD thermometer.About shipping and packaging: Sea frieght was my perferred method of shipping due to the lower cost but currently unavailable due to Japan Post. Webike kept me updated on the status of my order up to when it shipped. The parcel arrived within the expected date range and was well packaged with no chance of the part being damaged.Any concerns, cautions, or advice when purchasing: Keep in mind these compact LCD thermometers are only designed to read between 0 to 120 degress celsius so will not be suitable for all locations around the engine.